This isn't my first hydro set-up so it's not something that can be picked up at the store but all the parts necessary to build it can be. I've tried various hydro methods over the years and found that Ebb & Flow is the most user friendly (and forgiving
![Wink :wink:](./images/smilies/icon_wink.gif)
The system is based on 3 cells, contained in 2 chambers. The first chamber to go into production will be the DarkRoom 120W. It is basically 2' x 4' x 5.25', perfect for holding (2) 24" x 24" flood trays (with some slight modifications). First I flipped the DR120W upside down then built a support frame for the trays and the tent itself.
Lighting for the first tray is a 125W CFL, this tray is for seedlings and young plants. The other tray is lighted with a 400W MH in a sealed hood, vented with a 4" inline Vortex fan. The fan is run on a variable speed control, temp and humidity are checked digitally
Enough rambling, here's a few pics
hydroguy
![Image](%5Bimg%5Dhttp%3A//i784.photobucket.com/albums/yy130/hydroguy/Hydro%20chamber%201/CopyofPICT0043.jpg)
[/img]
![Image](%5Bimg%5Dhttp%3A//i784.photobucket.com/albums/yy130/hydroguy/Hydro%20chamber%201/CopyofPICT0045.jpg)
[img]https://i784.photobucket.com/albums/yy130/hydroguy/Hydro%20chamber%201/CopyofPICT0044.jpg[/img][/img]
[img]https://i784.photobucket.com/albums/yy130/hydroguy/Hydro%20chamber%201/PICT0052.jpg[/img]
[img]https://i784.photobucket.com/albums/yy130/hydroguy/Hydro%20chamber%201/PICT0050.jpg[/img]