Page 1 of 1
How Grow iceberg rose standard without grafting
Posted: Fri Apr 15, 2016 10:46 pm
by LALearner
Hi All. Is it possible to 'train' my icerberg rose to become a 'standard rose' of some sort? I know it might not be as pretty as a grafted rose. the bottom cane section might be a little 'crooked'. I am also okay with 'training' two canes up the support.
but is it possible? Please don't discuss about the benefits of grafting etc. I am trying to do this on a budget. I have a long flower bed which can accommodate a lot of standard roses at 4' on center spacing. that will cost me a lot if I get proper mature grafted standards. see attached image of an example plant I am already 'training'.
appreciate any advice!
Re: How Grow iceberg rose standard without grafting
Posted: Fri Apr 22, 2016 3:32 pm
by ButterflyLady29
Here in the semi frozen north it probably wouldn't work. So many times the old canes don't survive the winter.
Re: How Grow iceberg rose standard without grafting
Posted: Mon Apr 25, 2016 1:32 am
by LALearner
but what about sunny southern california?
Re: How Grow iceberg rose standard without grafting
Posted: Mon Apr 25, 2016 8:24 pm
by ButterflyLady29
It's worth a shot. All the pictures I saw had heavy duty supports holding the stems so you may have to change your post as the plant matures.
They are absolutely lovely. I would try some if I thought it would work.
Re: How Grow iceberg rose standard without grafting
Posted: Thu Apr 28, 2016 12:01 am
by LALearner
Thanks! good idea on the more sturdy posts. I'll get going on that
Re: How Grow iceberg rose standard without grafting
Posted: Thu Apr 28, 2016 7:12 am
by applestar
You want to use something that will snugly but securely hold the stem immobile against the support. I would recommend the tomato ties -- either Velcro or sponge rubber coated wire. This way you can make micro adjustments as it grows.
With these, you can wrap once tightly around the support, so the stem won't rub against the support, then all the way around the stem and support a couple of times.
Use a sturdier stake from the beginning -- thicker than the plastic-coated hollow metal one you have now, which tends to sag under stress, bend and kink. Tie about 4 inches from the ground, then every 2-3 inches to maintain straight cane.