Here's my basic plan, zone 10A
Posted: Tue Jun 02, 2015 11:59 pm
Hey everyone,
I've drawn up my plans, I know my lay out, my 50 watt solar panel, and eight 150cfm fans are on the way. I've noodled over where to place the fans to create the air flow I think I need; as well as, how to control the air flow for the 15ft long vent at the peak of the roof. I'm not sure if I should invest in some 6mm double wall polycarbonate panels or if basic singe wall from Home Depot will do the trick. I'm in climate zone 10A and rarely ever get freezing temps, but do get a lot of fog and coastal over cast.
Here's a pic of my basic plan, the grids are to scale (one square= 1sqft) I know it's a funky shape, but thats the shape of my lot. The North and West walls are up against a 7ft fence, the north wall is 9ft high and will house the high point vent. What do you all think? I'm all for input from people who have done this before.
I've drawn up my plans, I know my lay out, my 50 watt solar panel, and eight 150cfm fans are on the way. I've noodled over where to place the fans to create the air flow I think I need; as well as, how to control the air flow for the 15ft long vent at the peak of the roof. I'm not sure if I should invest in some 6mm double wall polycarbonate panels or if basic singe wall from Home Depot will do the trick. I'm in climate zone 10A and rarely ever get freezing temps, but do get a lot of fog and coastal over cast.
Here's a pic of my basic plan, the grids are to scale (one square= 1sqft) I know it's a funky shape, but thats the shape of my lot. The North and West walls are up against a 7ft fence, the north wall is 9ft high and will house the high point vent. What do you all think? I'm all for input from people who have done this before.