Hip2Bsquare
Newly Registered
Posts: 2
Joined: Wed Jan 20, 2021 9:32 pm

LED Driver help!!

I have a Garden Tower by JuicePlus and while I am enjoying it I recently encountered an issue with the LED lights. Two of the LEDs stopped working and because two still work fine I was able to isolate the issue to the LED driver that is located in the lighting cap. The lighting has 4 lights at 60W each wired to two LED drivers. So essentially each driver powers 2- 60w lights (see diagram of setup). One of my drivers died and now I have only two lights that work (attached to the working LED driver). Garden Tower only has a 1yr warranty so they flatly refused to help and would not even sell me a replacement driver as my setup is 2yrs old.
I have looked around and cannot find a 35VDC so my question is what would be the specs of the drivers needed if I just wired each one individually to their own driver rather than hooking the up together in parallel like they currently are.
I have attached a couple pictures to help show the setup.
Thanks for the help!

Hip2Bsquare
Newly Registered
Posts: 2
Joined: Wed Jan 20, 2021 9:32 pm

Found one!
Mean Well makes a driver. Costs around $40 but I think it will work.



Return to “HYDROPONICS FORUM”