I have a CFL over a plant in my room. Its on from about 9am to 12pm everyday. After about 20minutes its wayy too hot to touch. its in a metal "hood" thing (the conical shop light fixture) like this:
[img]https://www.gardenscure.com/420/attachments/lighting/142533d1126480155-shop-light-flouro-question-clamp.jpg[/img]
The hood does have a few holes for ventilation but apparently thats not enough. and by hot I mean the glass part is too hot to touch and the ballast would melt your hand. does anyone have suggestions to fix this? or a different type of hood that it can go in? because right now the bulbs are buring out after about a month due to the heat
- applestar
- Mod
- Posts: 30541
- Joined: Thu May 01, 2008 7:21 pm
- Location: Zone 6, NJ (3/M)4/E ~ 10/M(11/B)
I wonder what is causing this problem in your set up?
I use these utility lights all the time... And some of my fixtures don't ave on/off switch. I have most of them on timers but a couple are literally "turned" on and off by unscrewing the bulb. It is hot to the touch but not as hot as incandescents and I can hold the lit bulb by pulling my long T-shirt sleeve over my hand.
I use these utility lights all the time... And some of my fixtures don't ave on/off switch. I have most of them on timers but a couple are literally "turned" on and off by unscrewing the bulb. It is hot to the touch but not as hot as incandescents and I can hold the lit bulb by pulling my long T-shirt sleeve over my hand.
I don't know what size you are using but I would get a splitter or screw a extension on the bulb with a chain. The splitter would let you use two smaller watt bulbs maybe 1/2 the watt. The extension would place the bulbs 4 inches further from the metal! You may even want to try one blue or red bulb with the white bulb for a better light distrabution!.
They sell extenders that srew into a socket. You can buy them for about $2 anywhere. Most have plugs below where the bulb screws in. Some have a pull chain so you can turn it off and on with the chai. They are about 4 inches long in brown or white! They also ell a screw in light bulb holder that allows you to put two bulbs in line a v. Look in the bulb and electrical section.
+++
Here is what I mean . This is a single with no plug or chain! You can buy these in a v or y shape to hold two bulbs. Hope this helps!
+++
https://www.elightbulbs.com/leviton-02006-med-med-bakelite-sckt-extend-base-modifier
+++
Here is what I mean . This is a single with no plug or chain! You can buy these in a v or y shape to hold two bulbs. Hope this helps!
+++
https://www.elightbulbs.com/leviton-02006-med-med-bakelite-sckt-extend-base-modifier
- OROZCONLECHE
- Green Thumb
- Posts: 560
- Joined: Tue Oct 25, 2011 12:49 am
- Location: So California -Ontario-
- rainbowgardener
- Super Green Thumb
- Posts: 25279
- Joined: Sun Feb 15, 2009 6:04 pm
- Location: TN/GA 7b
They make those in compact fluorescent, energy saving versions too, and the flood light shape should help with your problem.
https://www.buylighting.com/Compact-Fluorescent-Flood-Lights-s/114.htm
in the meantime there are alternatives and more coming all the time:
LED bulbs are still very expensive, but beginning to come down as they start getting more popular. Sometimes you can find them on sale for prices more comparable to CFL's. The available versions have not been as bright as regular bulbs, but 60 watt equivalent LED's are now coming out. The LED is solid state, does not generate heat and lasts about 8 times as long as a CFL. And they are directional, so all the light goes in the direction it is aimed. They are suitable for recessed lighting, so also for your utility light. And they have no mercury in them, so they are not hazardous waste like CFLs. CFL's use 25% of the energy that incandescents do; LED's use 10%. https://www.popularmechanics.com/science/environment/will-led-light-bulbs-best-cfls-and-incandescents
and in dec or jan, lowes is going to start selling a new type of bulb called esl (electron stimulated luminescence in case you care).
It actually works like a computer monitor or TV tube. Instead of causing a gas to glow, an electron gun causes a phosphor coated screen to glow. They are not quite as energy efficient as CFL, more like 30% of the energy of incandescents. But they are mercury free, directional, designed for recessed lighting. They are rated for about the same life span as CFL's but because designed for recessed lighting, they should actually achieve that life span even in your utility fixture. They will be more expensive than CFL's, but half the price of LED's
https://news.cnet.com/8301-17938_105-10354160-1.html
So hang on... newer technologies are about to solve your problem!
https://www.buylighting.com/Compact-Fluorescent-Flood-Lights-s/114.htm
in the meantime there are alternatives and more coming all the time:
LED bulbs are still very expensive, but beginning to come down as they start getting more popular. Sometimes you can find them on sale for prices more comparable to CFL's. The available versions have not been as bright as regular bulbs, but 60 watt equivalent LED's are now coming out. The LED is solid state, does not generate heat and lasts about 8 times as long as a CFL. And they are directional, so all the light goes in the direction it is aimed. They are suitable for recessed lighting, so also for your utility light. And they have no mercury in them, so they are not hazardous waste like CFLs. CFL's use 25% of the energy that incandescents do; LED's use 10%. https://www.popularmechanics.com/science/environment/will-led-light-bulbs-best-cfls-and-incandescents
and in dec or jan, lowes is going to start selling a new type of bulb called esl (electron stimulated luminescence in case you care).
It actually works like a computer monitor or TV tube. Instead of causing a gas to glow, an electron gun causes a phosphor coated screen to glow. They are not quite as energy efficient as CFL, more like 30% of the energy of incandescents. But they are mercury free, directional, designed for recessed lighting. They are rated for about the same life span as CFL's but because designed for recessed lighting, they should actually achieve that life span even in your utility fixture. They will be more expensive than CFL's, but half the price of LED's
https://news.cnet.com/8301-17938_105-10354160-1.html
So hang on... newer technologies are about to solve your problem!
- OROZCONLECHE
- Green Thumb
- Posts: 560
- Joined: Tue Oct 25, 2011 12:49 am
- Location: So California -Ontario-