This is my first post on the board so, maybe this has been discussed before. If so, please forgive me. I did search but could not come up with much of anything.
I used to just stake my tomatoes with a tomato stake for each plant and that worked okay for 40-50 plants but, now we are planting hundreds of plants for the CSA and staking and tying each plant seems a bit overwhelming. This is our third year as a CSA and the last couple years we didn't use any staking. That was less than satisfactory for us. What methods do you folks use for your tomatoes?
I am thinking about using 1inch by 1 inch by 8 foot long stakes every 5 or 10 foot and running a heavy line or cable through a hole near the top and then running tomato strings down from that to each plant. Similar to the way I have seen on the Johnny's select seed video. Has anyone used this method? Does it work? Is there a better option? Thanks.
Please see the Sticky on [url=https://www.helpfulgardener.com/forum/viewtopic.php?t=25230]Tomato Support Methods[/url]. There are six pages of discussion regarding several methods, *some* of which do not require individual staking, etc.
Hope your CSA does very well this year!
Cynthia H.
Sunset Zone 17, USDA Zone 9
Hope your CSA does very well this year!
Cynthia H.
Sunset Zone 17, USDA Zone 9
- applestar
- Mod
- Posts: 30540
- Joined: Thu May 01, 2008 7:21 pm
- Location: Zone 6, NJ (3/M)4/E ~ 10/M(11/B)
I remember that particular method was described as typically used by commercial tomato growers in the sticky thread. Personally, I prefer not to prune my tomatoes to single stem. It sounds like a lot of work.
I like the Florida weave method for a long straight row of tomatoes. My idea of a long straight row is about 12 feet but this method is adaptable to any length row.
I like the Florida weave method for a long straight row of tomatoes. My idea of a long straight row is about 12 feet but this method is adaptable to any length row.