adbird
Newly Registered
Posts: 1
Joined: Sun Apr 15, 2007 8:38 pm
Location: Indiana

Hole in pond

I have a 3/4 inch hole with a cord running through it. Is there anything I can do to seal this hold up so it will not leak?

Hortoholic
Full Member
Posts: 53
Joined: Tue Apr 10, 2007 7:49 pm
Location: NH - Zone4

Use expandable foam that's made for ponds.....

https://www.pondpetsusa.com/miscellaneous/pur_black_foam.html

opabinia51
Super Green Thumb
Posts: 4659
Joined: Thu Oct 21, 2004 5:58 pm
Location: Victoria, BC

I looked at the product and they don't have a list of the chemical used in this product. I would do a little checking up on it before ordering it. Try sending the proprietors an email asking them for an ingredients list and if they have the information the toxicology reports (or just the MSDS's) of these chemicals before ordering the product.

Would have checked up on this information for you but, the ingredients are not listed on the website.

Hortoholic
Full Member
Posts: 53
Joined: Tue Apr 10, 2007 7:49 pm
Location: NH - Zone4

:lol:, I would guess form adbirds first post that this is a new pond that will have lots of stuff that needs to out gassing and chemically come to balance.....The foam was made for use inside waterfalls & ponds.....

The link was provided for further research.......

pomme8916
Full Member
Posts: 26
Joined: Tue May 01, 2007 7:43 pm
Location: United States

They have Patch Kits Available.



Return to “What Doesn't Fit Elsewhere”